The production process of glass wine bottles is more complicated, and the bottles with color patterns are more than a variety of processes, today I will take you to understand the production process of glass wine bottles.
1. Pre-processing segment. The pre-treatment section of glass bottle spraying includes pre-removal, main removal, surface adjustment, etc., if it is in the north, the temperature of the main detachment part can not be too low, and it needs to be insulated, otherwise the treatment effect is not ideal.
2. Preheating section. After the pre-treatment, it will enter the preheating section, which generally takes about eight minutes, and the glass bottle should have a certain residual heat of the sprayed workpiece when it reaches the powder spraying chamber, which is conducive to increasing the adhesion of the powder.
3. Glass wine bottle sootblowing purification section. If the process requirements of the sprayed workpiece are relatively high, this section must be less, otherwise if there is a lot of dust adsorbed on the workpiece, there will be a lot of granular on the surface of the processed workpiece.
4. Spraying section. The key to this section is the technical problem of the spraying master.
5. Drying section. This paragraph should pay attention to the temperature and baking time, the powder is generally about 200 degrees as well, in addition, the drying furnace should not be too far from the powder spraying room, generally six meters is good.
